2 | Instant Install |
Note:
Note:
If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SX25. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable you to play music now!
Please take the time to read the SX25 manual thoroughly as it incorporates many features, which will enhance its operation.
Placement
The SX25 is a convection cooled amplifier and best results will be achieved when placed on a solid surface with adequate ventilation. DO NOT place on a carpeted floor or cover the amplifier!
Place the SX25 close or near the source component in order to make as short a connection as possible.
Turn off associated components
This minimises the potential to damage any other components when connecting your SX25 into the system.
Connect source to preamplifier
Connect the audio output from the source component to the input of your preamplifier.
Connect preamplifier to SX25
Connect the audio output from your preamplifier to the inputs at the rear of the SX25. Refer to Chapter 4 for Rear Panel information.
Connect loud speaker cables to SX25
Connect your left and right channel loudspeaker leads to the speaker binding posts at the rear of the amplifier. Refer to Chapter 4 for Rear Panel information.
Make sure the nominal impedance of the loudspeakers is not lower than 2Ω.
7
