1Unpacking and Placement
Unpacking Procedure
Note:
Box
Contents
Placing Your SX25
Ventilation Requirements
Note:
6
The SX25 is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed.
Pull the foam protecting
The SX25 Power amplifier is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
1 x SX25 Power amplifier
1 x Product manual
3 x Performance analysis charts
1 x Detachable AC power cord
The SX25 should generally be placed close to your source equipment, thus keeping interconnect cabling between the SX25 and associated components as short as practical. This will reduce the systems susceptibility to radio frequency (RF) interference and the negative effects associated with long cables.
The SX25 is a convection cooled amplifier. For optimal performance, the unit MUST receive adequate ventilation.
Please do not cover the product with a cloth or similar.
Please do not mount the SX25 directly onto carpeted surfaces.
In the event that the SX25 is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 12).
Please take all necessary steps to ensure that the unit receives adequate ventilation
