DeLonghi DEDW654FI manual Troubleshooting Dishwasher Safety Precautions, Safety Alert Symbol

Troubleshooting

Dishwasher Safety Precautions

	Problem	Possible Causes	Solution
	The dishes	The dishes were not	See notes in " Loading the Dishwasher Baskets ".
	are not clean	loaded correctly.
result
		The program was	Select a more intensive program.
		not powerful enough.	See" Wash Cycle Table ".
		Not enough detergent	Use more detergent, or change your detergent.
washing		was dispensed.
		Items are blocking	Rearrange the items so that the spray can rotate freely.
		the path of spray arms.
		The filter combination	Clean and/or fit the filter combination correctly.
Unsatisfactory		in the base of wash	Clean the spray arm jets. See "Cleaning the Spray
		cabinet is not clean or	Arms".
		is not correctly fitted.
		This may cause
		the spray arm jets
		to get blocked.
	Cloudiness	Combination of soft	Use less detergent if you have soft water and select
	on glassware	water and too much	a shorter cycle to wash the glassware and to get
		detergent.	them clean.
	Black or gray	Aluminum utensils have	Use a mild abrasive cleaner to eliminate those marks.
	marks on dishes	rubbed against dishes.
	Detergent left in	Dishes block	Re-loading the dishes properly.
	dispenser cups	detergent cups.
	The dishes are	Improper loading	Load the dishwasher as suggested in the directions.
	not drying
		Too little rinse-aid	Increase the amount of rinse-aid/refill the rinse-aid
			dispenser.
Unsatisfactory drying results
		Dishes are removed	Do not empty your dishwasher immediately after
		too soon	washing. Open the door slightly so that the steam can
			escape. Begin unloading the dishwasher only once t
			he dishes are barely warm to the touch. Empty the low
			basket first. This prevents water form dropping off
			dishes in the upper basket.
		Wrong program	In short program the washing temperature is lower.
		has been selected	This also lowers cleaning performance. Choose
			a program with a long washing time.

Your safety and the safety of others is very important. Safety messages are displayed in this manual and on your appliance.

Read and obey these safety messages as they will alert you to potential hazards and tell you how to reduce the chance of injury.

DANGER

Safety Alert Symbol

This symbol alerts you to potential hazards.

Danger

Danger indicates a high level of risk to yourself and others. Ensure that care is taken to avoid severe injury or even death.

Use of cutlery with	Water drainage is more difficult with these items.
a low-quality coating	Cutlery or dishes of this type are not suitable for
	washing in the dishwasher.

ERROR CODES

When some malfunctions occur, the appliance will display error codes to warn you:

Codes	Meanings	Possible Causes
Error 1	Longer inlet time.	Faucet is not opened, or water intake is restricted, or water
		pressure is too low.
Error 4	Overflow	Some element of dishwasher leaks.
Error 8	Failure of diverter valve.	Open circuit or break of diverter valve.
Error C	Fault of PCB data transmission.	PCB failure

WARNING!

ŸIf overflow occurs, turn off the main water supply before calling service.

ŸIf there is water in the base pan because of an overfill or small leak, the water should be removed before restarting

the dishwasher.

WARNING

CAUTION

Warning

Warning indicates a moderate level of risk to yourself, others and the product. Ensure that care is taken to avoid extensive product damage or serious injury.

Caution

Caution indicates a level of risk to yourself, others and the product. Ensure care is taken to avoid moderate product damage or injuries.

Page 28 Page 5