XS712T Smart Switch
Binding Configuration
Use this screen to view, add, and remove static bindings in the DHCP snooping bindings database and to view or clear the dynamic bindings in the bindings table.
To configure static DHCP bindings:
1.Select System > Services > DHCP Snooping > Binding Configuration.
2.The DHCP Snooping Binding Configuration screen displays.
3.From the Interface list, select the interface on which the DHCP client is authorized.
4.Under MAC Address, specify the MAC address for the binding to be added. This is the key to the binding database.
5.From the VLAN ID list, field, select the ID of the VLAN the client is authorized to use.
6.Under IP Address, specify the IP address of the client.
7.Click Add to add the DHCP snooping binding entry into the database.
The DHCP Snooping Dynamic Binding Configuration table shows information about the DHCP bindings that have been learned on each interface on which DHCP snooping is enabled. The following table describes the dynamic bindings information.
Table 15. DHCP Snooping dynamic binding information
Field | Description |
|
|
Interface | The interface on which the DHCP client message was received. |
|
|
MAC Address | The MAC address associated with the DHCP client that sent the message. This |
| is the Key to the binding database. |
|
|
VLAN ID | The VLAN ID of the client interface. |
|
|
IP Address | The IP address assigned to the client by the DHCP server. |
|
|
Lease Time | The remaining IP address lease time for the client. |
|
|
73
