XS712T Smart Switch
VLAN Binding Table
Use the VLAN binding table screen to associate an ACL with a VLAN.
To configure an
1.Select Security > ACL > Advanced > Vlan Binding Table.
2.In the VLAN ID field, specify a VLAN ID for ACL mapping.
3.In the Direction field, specify the direction of packet traffic affected by the ACL, which can be Inbound or blank.
4.(Optional) In the Sequence Number field, specify the sequence number of the access lists.
This sequence number indicates the order of this access list relative to other access lists already assigned to this VLAN and direction. A lower number indicates higher precedence order. If a sequence number is already in use for this VLAN and direction, the specified access list replaces the currently attached access list using that sequence number. If the sequence number is not specified by the user (i.e., the value is 0), a sequence number that is one greater than the highest sequence number currently in use for this VLAN and direction will be used. Valid range is (1 to 4294967295).
5.From the ACL Type list, select the type of ACL:
•IP ACL
•MAC ACL
•IPv6 ACL
6.From the ACL ID list, select the ID of the ACL to bind to the specified VLAN.
The ACL ID field displays all the ACLs configured, depending on the ACL Type selected.
7.Click Add.
To delete a VLAN binding:
1.Select the check box next to the VLAN with the ACL binding to remove.
2.Click Delete.
