XS712T Smart Switch
-Mark IP Precedence. These packets are marked by DiffServ with the specified IP Precedence value before being presented to the system forwarding element. This selection requires that the Mark IP Precedence value field be set.
-Mark IP DSCP. These packets are marked by DiffServ with the specified DSCP value before being presented to the system forwarding element. This selection requires that the DSCP value field be set.
5.Click Apply.
Service Configuration
Use the Service Configuration screen to activate a policy on an interface.
To attach a DiffServ policy to an interface:
1. Select QoS > DiffServ > Advanced > Service Configuration.
2.To configure DiffServ policy settings for a physical port, enter the interface and click Go to select that particular interface.
3.Select the interfaces for which you want to configure the service interface settings:
•To configure service interface settings for a Link Aggregation Group (LAG), click LAGS.
•To configure service interface settings for both physical ports and LAGs, click ALL.
4.Select the check box next to the port or LAG to configure.
