XS712T Smart Switch

4.Click Apply.

Configure Management Access

From the Access menu, you can configure HTTP and Secure HTTP access to the XS712T management interface. You can also configure Access Control Profiles and Access Rules.

The Access tab contains links described in the following sections.

HTTP Configuration

Secure HTTP Configuration

Certificate Management

Certificate Download

Access Control

HTTP Configuration

Use the HTTP Configuration screen to configure the HTTP server settings on the system.

To configure the HTTP server settings:

1. Select Security > Access > HTTP > HTTP Configuration.

2.Enable or disable the Web Java Mode.

This applies to both secure and unsecure HTTP connections.

3.In the HTTP Session Soft Timeout field, specify the number of minutes an HTTP session can be idle before a timeout occurs.

After the session is inactive for the configured amount of time, the administrator is automatically logged out and must re-enter the password to access the management interface. A value of zero corresponds to an infinite timeout. The valid range is 0- to 60 minutes. The default value is 5 minutes.

4.In the HTTP Session Hard Timeout field, specify the hard timeout for HTTP sessions.

This timeout is unaffected by the activity level of the session. The value must be in the range of (0–168) hours. A value of zero corresponds to an infinite timeout. The default value is 24 hours.

183

Page 183
Image 183
NETGEAR XS712T-100NES manual Configure Management Access, Http Configuration, 183