Sun Microsystems Sun Fire V100 manual Adding or Changing Internal Components

4.Replace the zip tie on the new system.

5.Power on the new system (see Chapter 4).

Caution –Never remove the system configuration card when the server is booting or running Solaris. Power the server off or down to standby mode before removing or inserting the system configuration card.

Caution –Do not handle the system configuration card unless you need to transfer it to another system. If you need to handle it for this reason, avoid contact with the gold terminals on the underside of the card.

FIGURE 8-1The System Configuration Card Slot

Adding or Changing Internal

Components

The procedures in this section are for the attention of qualified service engineers only. If you need to replace or add a component, contact your local Sun sales representative, who will put you in touch with the Sun Enterprise Service branch for

Chapter 8 Removing and Replacing Components 87