Sun Microsystems Sun Fire V100 manual To Change Components In a Sun Fire Server That Is In Use

your area. You can then arrange to return the system to Sun for repair under the terms of your warranty or you can order the components and have them installed by your own qualified service engineers.

Caution –The system contains electronic parts that are extremely sensitive to static electricity. Do not touch any metal parts. Place the system on top of an electrostatic discharge (ESD) pad (see FIGURE 8-2). Use the disposable antistatic wrist strap supplied with the system, and attach it to the metal base of the system before touching any of the internal components.

Caution –Before attempting to remove the cover, make sure that the server is powered off and that the power cord, and all other cables, have been disconnected from it.

FIGURE 8-2Using the Disposable Antistatic Wrist Strap Supplied With the System

▼To Change Components In a Sun Fire V100

Server That Is In Use

If the system is currently in use and you need to open it to install a component:

1. Shut down the Solaris environment from the console.

88 Sun Fire V100 Server User’s Guide • December 2001