Sun Microsystems Sun Fire V100 manual To Remove a Hard Disk Drive, 8Installing a Hard Disk Drive

Step 4b

Step 4a

FIGURE 8-8Installing a Hard Disk Drive

5.Attach the power and data cables (see FIGURE 8-8).

6.Replace the system cover and tighten the captive screw (see FIGURE 8-4).

▼To Remove a Hard Disk Drive

■If the server is not in use, go straight to Step 1.

■If the server is already in use, see “To Change Components In a Sun Fire V100 Server That Is In Use” on page 88.

1.Place the unit on an ESD surface and attach an antistatic wrist strap (see

FIGURE 8-2).

2.Remove the server’s top cover (see “To Remove the Top Cover” on page 89).

3.Disconnect the data and power cables.

94 Sun Fire V100 Server User’s Guide • December 2001