Sun Microsystems Sun Fire V100 manual If you are at the lom prompt, go to the ok prompt by typing

●If you are at the lom> prompt, go to the ok prompt by typing:

lom> break

1.Boot the server into the Solaris environment by typing:

ok boot

2.At the Solaris prompt, type:

#sys-unconfig

3.When prompted to confirm that you want to create a “blank” server, type y.

4.When the server has unconfigured itself, type the LOM escape sequence. By default, this is:

##.

When the lom> prompt appears, follow the instructions in one of the following sections:

■“To Power On With the Server’s Details Registered at a Name Server” on page 34 or

■“To Power On Without the Server’s Details Registered at a Name Server” on page 35.

■“To Power On a Standalone Server for the First Time” on page 37

38 Sun Fire V100 Server User’s Guide • December 2001