Sun Microsystems Sun Fire V100 manual To Find Out If SunVTS is Installed, Type

●Type:

ok setenv diag-level value

SunVTS

SunVTS, the Sun Validation and Test Suite, is an online diagnostics tool which you can use to verify the configuration and functionality of hardware controllers, devices and platforms. It runs in the Solaris 8 operating environment using any of the following:

■command line interface

■serial (tty) interface

■graphical interface within a windowed desktop environment.

SunVTS software lets you view and control a testing session on a remotely connected server. Below is a list of example tests:

TABLE 10-2SunVTS Tests

SunVTS Test	Description
disktest	Verifies local disk drives
fputest	Checks the floating-point unit
nettest	Checks the networking hardware on the system CPU board and on
	network adapters contained in the system.
pmem	Tests the physical memory (read only)
sutest	Tests the server’s on-board serial ports
vmem	Tests the virtual memory (a combination of the swap partition and
	the physical memory)

To Find Out If SunVTS is Installed

To check whether SunVTS is installed:

●Type:

#pkginfo -l SUNWvts

■If SunVTS software is loaded, information about the package will be displayed.

Chapter 10 Troubleshooting 103