Sun Microsystems Sun Fire V100 manual To Make the LOM Interface Backward Compatible lom -B, Type

●To turn serial event reporting on again, type:

#lom -E on

If you want to dedicate the Serial A/LOM port to the LOM device and you want to use the Serial B port as your console port, see “To Dedicate Serial A/LOM to LOM” on page 60.

▼To Make the LOM Interface Backward Compatible (lom -B)

If you have scripts written to the LOMlite interface on the Netra T1 Model 100/105 server or the Netra t 1400/1405 server and you want to use these scripts on the Sun Fire V100 server, you can add file system links that make this possible.

●Type:

#lom -B

When you have done this, you will be able to use the old scripts on the new system.

▼To Upgrade LOM Firmware (lom -G default)

To upgrade the firmware for LOM, obtain the new firmware package from the SunSolveSM website (http://sunsolve.sun.com) or from your local Sun sales representative, and type the following:

#lom -G default

Note –LOM firmware upgrades are released as patches and include detailed installation instructions.

78 Sun Fire V100 Server User’s Guide • December 2001