Lincoln Electric SP-100 Parts, Accessories, and Replacement Guide

TOC

TOC

C-1ACCESSORIES

LINCOLN GAS REGULATOR KITS K467 INPUT LINE CORD

Return to Section

Return to Section TOC

TOC

Return to Master

Return to Master TOC

The Lincoln K463 CO2 or K499 Ar-mixed Gas Regulator and Hose Kit is recommend- ed for use with the SP100.

K463 CO2 Regulator

The K463 kit includes a preset, non- adjustable pressure flow regulator for use on CO2 cylinders. The K463 CO2 pressure- flow regulator is preset at the factory to pro- vide a flow rate of 20 cubic feet per hour (10 l/min). This setting cannot be changed. Also included is a 10 foot (3,0 m) gas hose which connects to the rear of the SP-100.

The K463 CO2 pressure-flow regulator can be used with a cylinder of argon mixed gas if a CGA-580-320 (Western Enterprises No.

810)adapter is used between the cylinder and the regulator.

Weld shielding gas may be obtained from a welding supply distributor.

K499 Ar-Mixed Gas Regulator

K499 Ar-Mixed Gas Regulator and Hose Kit

–Includes a preset, non-adjustable pres- sure and flow regulator for use on argon- mixed gas cylinders. Also included is a 10 foot (3 0 m) gas hose which connects to the rear of the SP-100.

The K467 Input Line Cord is the same as the line cord supplied with the SP-100, but has a NEMA type 5-20P plug for use on 25 amp branch circuits.

To install optional features, refer to in- structions included with the kit.

REPLACEMENT PARTS

Complete Gun and Cable Assembly

L7538 – Black Trigger; L8311-2 (K530-2) –

Red Trigger

Contact Tip 0.025” (0,6 mm)

S18704-1 – Black Trigger; S19726-1 – Red Trigger

Contact Tip 0.030” (0,8 mm)

S18704-2 – Black Trigger; S19726-2 – Red Trigger

Contact Tip 0.035” (0,9 mm)

S18704-3 – Black Trigger; S19726-3 – Red Trigger

Liner 0.023 - 0.030” (0,6 - 0,8 mm)

S18704-4 – Black Trigger; M16291-2 – Red Trigger

Return to Section

TOC

Return to Master TOC

TOC

INNERSHIELD WELDING KITS

0.035 (0.9 mm) Innershield Welding Kit

–Includes a contact tip, a gasless nozzle and a cable liner to permit the SP-100 gun and cable to use a 0.035” (0,9 mm) dia- meter flux-cored electrode. Also included is a spool of 0.035 (0,9 mm) Innershield NR-211-MP.

Two kits are available:

K549-1 kit is for use with Magnum 100L gun (with red trigger).

K464 kit is for use with the original Lincoln Electric gun (with black trigger).

Liner 0.035” (0,9 mm)

S18704-5 – Black Trigger; M16291-1 – Red Trigger

Gas Diffuser

S18704-6 – Black Trigger; S19728 – Red Trigger

Gas Nozzle

S18704-7 – Black Trigger; M16294 – Red Trigger

Gasless Nozzle (Innershield Only)

S18704-14 – Black Trigger; M16418 – Red Trigger

Return to Section

Return to Master

DRIVE ROLL

M15448-1 Reversible Drive Roll with double knurled grooves for 0.035 (0,9 mm) cored electrode.

SP-100