Sun Microsystems Sun Fire V100 manual Adding Components or Replacing A Server

Adding Components or Replacing A Server

For a list of components that are available for the Sun Fire V100 server, see “Optional Components” on page 4. If there is a fault with any of the components listed below, replace the whole server. Should you need to do this, contact your Sun sales representative.

■Motherboard

■Processor

■Power Supply Unit

■Fan

■CD-ROM drive

The server contains a memory card called the system configuration card. The card contains the following data:

■the only copy of NVRAM

■IDPROM

■host ID

■MAC address

Replacing the System Configuration Card

The card is removable so that you can transfer the host ID and configuration data onto a new server, allowing quick and easy server replacement.

▼To Swap the System Configuration Card (SCC) Between Servers

1.Make sure that both Sun Fire V100 servers are powered down.

2.Remove the zip ties securing the system configuration cards in both servers, and remove the cards.

3.Insert the system configuration card from the old server into the new one.

86 Sun Fire V100 Server User’s Guide • December 2001