Sun Microsystems Sun Fire V100 manual To Stop LOM Sending Event Reports to the Serial A/LOM Port

●Turn the alarm off by typing:

lom> alarmoff n

where n is the number of the alarm you want to turn off: 1, 2, or 3.

Alarms 1, 2, and 3 are software flags. They are not associated with any specific conditions, but are available to be set by your own processes or from the command line. For more information, see “To Turn the Alarms On and Off (lom -A)” on page 76.

▼To Stop LOM Sending Event Reports to the Serial A/LOM Port

●Enable event reporting by typing:

lom> event-reporting on

Note –This is the equivalent of using the lom -E on command from the Solaris shell. For more information, see “To View the Event Log (lom -e)” on page 72.

●Disable event reporting by typing:

lom> event-reporting off

Note –This is the equivalent of using the lom -E off command from the Solaris shell. For more details, see “To Stop LOM From Sending Reports to the Serial A/ LOM Port (lom -E off)” on page 77.

Chapter 5 Managing the Sun Fire V100 Server From the lom> Prompt 59