1-44
Adjusting Image Colors — Color Correction
4 Watching the image on the monitor, turn the F1 to F5 knobs to adjust the color.
F1(Gain): adjust the chrominance gain (the depth of the colors).
F2(Hue): adjust the hue.
Note
When F3(Offset) is set to its minimum value of zero, turning the
F2(Hue) knob has no effect on the hue.
Freezing an Input Image — Frame Memory Function
Using the frame memory function, you can capture a “freeze frame” from input video or store a still frame. You can then use this still image as a video source.
Procedure
To capture a freeze frame in memory, use the following procedure.
F3(Offset): vary the adjustment range of the F2(Hue) knob. The larger the value of “Offset,” the wider the range of color adjustment. A smaller value for “Offset” means that the F2(Hue) knob can be used for fine adjustment.
F4(HueRot): set the hue.
F5(Gamma): adjust the gamma value of the luminance signal.
| To turn off the color correction function |
| |
Chapter 3 | In the menu control section press the CCR button, turning it off. |
| |
Basic Operation |
|
|
|
|
|
|
|
| 2 |
| 5 |
| 1,6 | |||
|
| 1 TITLE 2 | DSK | EDGE |
|
|
|
|
|
|
|
|
| |
| EDITOR | LUM | LUM | LUM | TRAIL |
|
|
|
|
|
|
|
|
|
|
|
|
|
| SHADOW |
|
|
|
|
|
|
|
|
|
| GPI | CRK | CRK | BORDER | BEVELD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| EDGE |
| INITIAL |
|
|
|
|
|
|
|
| SET UP | MASK | MASK | MASK | SOFT |
|
|
|
|
|
|
|
|
|
| SHIFT | CCR | LIGHTING MATTES | BORDER |
| PATTERN | PAGE | F1 |
| F2 | F3 | F4 | F5 | |
|
|
|
|
|
|
| ADJ |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| EFFECT |
|
|
|
|
|
|
|
|
|
| TRANS RATE |
|
| DSK |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| FTB | SET |
3 |
|
| CCR | TITLE 1 | TITLE 2 | DSK | SUPER BG FRGD 2 | MEMORY | FRAME | FREEZ | MIX | EFFECT |
| |
AUXILIARY |
| SOURCE | SOURCE | FILL |
|
|
|
|
|
|
|
| ||
BLACK | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | MEMORY | INT |
| TITLE |
| |
BACKGROUND |
|
|
|
|
|
|
|
| VIDEO |
|
|
| ||
4 | BLACK | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | MEMORY | INT | CUT |
| |
VIDEO |
| |||||||||||||
FOREGROUND |
|
|
|
|
|
|
|
|
|
|
|
| ||
BLACK | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | MEMORY | INT | AUTO |
| ||
| VIDEO | TRANS |
|
USER PGM | SNAP SHOT |
|
|
| |
STATUS EDIT |
|
|
|
|
|
EDIT | LEARN |
|
|
|
|
| RECALL |
|
|
|
|
| HOLD |
| LOCATION |
| |
| INPUT |
|
|
|
|
PATTERN NUMBER |
|
|
|
| |
|
|
|
| SET |
|
| N/R | REV | DIRECT | DIRECT | DSK PVW |
|
|
| RECALL PATTERN |
| |
|
|
|
| LAST X | FADE |
| 7 | 8 | 9 |
| TO |
| INS | BLACK | |||
| 4 | 5 | 6 | DEL |
|
|
|
|
| P IN P | DSK |
| 1 | 2 | 3 | RST | |
|
| ||||
| DOWN | UP | ENTER |
|
0
PATTERN/KEY PAD
Chapter 3 Basic Operation
|
1 If the FREEZ button is lit, press it, turning it off.
2 In the delegation section press the MEMORY button, turning it on.
3 Press one of the AUXILIARY buttons, turning it on, to select the input video signal.
4 Press the MEMORY button in the BACKGROUND bus button row, turning it on.
5 • To capture a frame from still video, press the FRAME button turning it on.
•To capture a field from moving video, leave the FRAME button off. (Pressing the FRAME button toggles it on and off.)
6 Press the FREEZ button, turning it on, to capture the image. (For capture from a moving video input, press the FREEZ button at the point you want to capture.)
The captured image appears on the output bus, and is written to memory.
Note
Even if other than MEMORY is selected on the BACKGROUND bus buttons, you can still capture the selected image with an AUXILIARY button.
Chapter 3 Basic Operation