Manuals / Invacare / Personal Care / Mobility Aid

Invacare 1026793 Adjusting 70 MFX and 90 Footrests, NOTE For this procedure, refer to FIGURE

Models: 1026793

1 60

Download 60 pages 35.02 Kb

Page 29

Adjusting 70° MFX and 90° Footrests

SECTION 4—FRONT RIGGINGS

Installing/Removing

Footrest Mounting Pin

Footrest Release Lever

Mounting Tube

Adjusting

Coved Washer

Footrest

Hex Screw

FIGURE 4.1 Installing/Removing/Adjusting the Footrests - Swingaway Front Frame

Adjusting 70° MFX and 90° Footrests

NOTE: For this procedure, refer to FIGURE 4.2.

1.Remove any accessories that are attached to the footrests.

2.Remove the socket bolt, coved washer and locknut that secure the footplate to the footrest support.

3.Reposition the footplate to the desired height.

4.Reinstall the socket bolt through the mounting holes of the footplate and footrest support.

CAUTION

DO NOT overtighten socket bolt and locknut. Footrest must be able to rotate upward from the horizontal to the vertical position.

5. Secure the footplate to the footrest support with the coved washer and locknut.

Footrest

Support

Height Adjustment

Holes

Locknut

Socket Bolt

Footplate

FIGURE 4.2 Installing/Removing/Adjusting the Footrests - Adjusting 70° MFX and 90°

Footrests

Part No 1026793

29

Xtra™

Image 29

Invacare 1026793 manual Adjusting 70 MFX and 90 Footrests, NOTE For this procedure, refer to FIGURE

Contents

DEALER This manual MUST be given to the user of the wheelchair Owner’s Operator and Maintenance ManualXtra Xtra TABLE OF CONTENTS TABLE OF CONTENTSSECTION 2-SAFETY/HANDLING OF WHEELCHAIRS SECTION 3-SAFETY INSPECTION/TROUBLESHOOTINGTABLE OF CONTENTS TABLE OF CONTENTSInstalling/Removing/Adjusting the Footrests Adjusting 70 MFX and 90 FootrestsTABLE OF CONTENTS TABLE OF CONTENTSSECTION 7-ARMS SECTION 8-WHEELSTABLE OF CONTENTS REGISTER YOUR PRODUCTLIMITED WARRANTY Installing Amputee AttachmentsCut Along Line PRODUCT REGISTRATION FORMFold herePlease Seal with Tape Before Mailing Fold here Cut Along Line Fold hereInvacare Product Registration Form SPECIAL NOTES Manual Title LABEL LOCATIONSLABEL LOCATIONS XTRA TYPICAL PRODUCT PARAMETERSTYPICAL PRODUCT PARAMETERS Stability SECTION 1-GENERAL GUIDELINESNOTE When changes to the left the chart and refer to theOperating Information Repair and Service InformationALWAYS keep hands and fingers clear of moving parts to avoid injury Tire Pressure Weight TrainingWeight Limitation Stability and Balance SECTION 2-SAFETY/HANDLING OF WHEELCHAIRSA Note to Wheelchair Assistants Coping with Everyday ObstaclesNOTE For this procedure, refer to FIGURE TippingNOTE For this procedure, refer to FIGURE Tipping - CurbsStairways NOTE For this procedure, refer to FIGURE Transferring To and From Other SeatsAdjusting the Wheelbase for Stability Percentage of Weight DistributionNOTE For this procedure, refer to FIGURE NOTE For this procedure, refer to FIGUREReaching, Bending - Backward Reaching, Leaning and Bending - ForwardNOTE For this procedure, refer to FIGURE NOTE For this procedure, refer to FIGURESafety Inspection Checklists SECTION 3-SAFETY INSPECTION/ TROUBLESHOOTINGInspect/Adjust Weekly Inspect/Adjust Periodically SECTION 3-SAFETY INSPECTION/TROUBLESHOOTINGInspect/Adjust Monthly Maintenance TroubleshootingCHAIR VEERS LEFT/RIGHT SLUGGISH TURN/PERFORMANCESuggested Maintenance Procedures SECTION 4-FRONT RIGGINGS Installing/Removing/Adjusting the FootrestsNOTE For this procedure, refer to FIGURE NOTE Make sure to note the position of the washers before disassemblyNOTE For this procedure, refer to FIGURE Adjusting 70 MFX and 90 FootrestsRaising/Lowering Elevating Legrests Installing Elevating LegrestsNOTE For this procedure, refer to FIGURE NOTE For this procedure, refer to FIGUREInstalling Adjustable Angle Flip-Up Footplate Hinge Adjusting CalfpadsNOTE For this procedure, refer to FIGURE NOTE For this procedure, refer to FIGUREDepth Adjustment Adjusting Adjustable Angle Flip-Up FootplatesAngle Adjustment NOTE For this procedure, refer to FIGUREInstalling Impact Guards/Calf Strap Heel Loop ReplacementNOTE For this procedure, refer to FIGURE NOTE For this procedure, refer to FIGURESECTION 5-BACK Adjusting the Back HeightNOTE For this procedure, refer to FIGURE NOTE Both back canes should be adjusted to the same adjustment holeNOTE For this procedure, refer to FIGURE Adjusting the Back AngleNOTE This procedure applies to adjustable angle backs only Detail A - backNOTE For this procedure, refer to FIGURE Installing/Removing the Chest Positioning StrapInstalling and Removing a Seating System Installing the Stroller HandlesNOTE For this procedure, refer to FIGURE NOTE This procedure applies to ALL stroller handlesNOTE For this procedure, refer to FIGURE SECTION 6-SEATFolding/Unfolding the Wheelchair Replacing Seat Upholstery Installing/Removing Seat Positioning StrapNOTE For this procedure, refer to FIGURE NOTE For this procedure, refer to FIGURENOTE For this procedure, refer to FIGURE Installing Fabric Clothing GuardsNOTE For this procedure, refer to FIGURE Installing Clothing GuardsNOTE For this procedure, refer to FIGURE Installing the Half ArmSECTION 7-ARMS NOTE For this procedure, refer to FIGURE Adjusting Half Arm HeightAdjusting Armrest Height Using/Adjusting Dual Point ArmsNOTE For this procedure, refer to FIGURE Removing ArmrestsReplacing Dual Point Arm Pad/Clothing Guards Installing/Removing T-ArmsNOTE For this procedure, refer to FIGURE NOTE This procedure is for fixed height dual point arms ONLYAdjusting T-Arm Height Adjusting the T-ArmsNOTE For this procedure, refer to FIGURE Removing T-ArmsNOTE For this procedure, refer to FIGURE Adjusting T-Arm WidthNOTE For this procedure, refer to FIGURE Adjusting T-Arm DepthNOTE Additional positions are obtainable by turning the arm tube NOTE Desk length armNOTE For this procedure, refer to FIGURE Adjusting T-Arm SocketsT-Arm T-Arm Clamp Hex Screws and Washer SlotNOTE For this procedure, refer to FIGURE Adjusting T-Arm Transfer Assists and/or Side GuardsRemoving/Installing Rear Wheels Repairing/Replacing Pneumatic Tire/TubeSECTION 8-WHEELS NOTE For this procedure, refer to FIGUREPermanent Axles NOTE For this procedure, refer to FIGURE Adjusting Quick-Release AxlesLocking Pins Axle Mounting PlateNOTE For this procedure, refer to FIGURE Installing Quad-Release AxlesNOTE For this procedure, refer to FIGURE Adjusting Quad-Release HandlesNOTE For this procedure, refer to FIGURE In and/or OutNOTE For this procedure, refer to FIGURE Adjusting ForksNOTE For this procedure, refer to FIGURE Replacing/Adjusting the Wheel LocksSECTION 9-WHEEL LOCKS/ANTI- TIPPERS Installing Anti-Tippers Installing/Adjusting the Anti-TippersAdjusting Anti-Tippers NOTE For this procedure, refer to FIGURENOTE This will maintain the current rear seat to floor height Installing Amputee AttachmentsNOTE For this procedure, refer to FIGURE Canada LIMITED WARRANTY