Invacare 1026793 Using/Adjusting Dual Point Arms, Adjusting Armrest Height, Removing Armrests

SECTION 7—ARMS

Using/Adjusting Dual Point Arms

WARNING

Make sure the locking mechanism is secured before using the wheelchair.

NOTE: For this procedure, refer to FIGURE 7.3.

Adjusting Armrest Height

1.Unlock the armrest by flipping the armrest release lever on the top front of the armrest to the UP (HORIZONTAL) position.

2.Adjust armrest to desired height.

NOTE: Armrest locks MUST be in the unlocked position when placing armrest into the arm assembly.

3.Lock the armrest by pressing the release lever into the DOWN (VERTICAL) position when the desired armrest height is achieved.

Lock (Vertical)

Unlock

(Horizontal)

Armrest

Release

ArmrestLever

Release

Lever

Height Adjustment

Lever

FIGURE 7.3 Using/Adjusting Dual Point

Arms

Removing Armrests

1.Unlock the arm assembly by flipping the armrest release lever located on the side rail to the UP (HORIZONTAL) position.

2.Remove armrest from the wheelchair.

Replacing Armrests

NOTE: Armrest release levers MUST be in the unlocked position when placing armrests into the arm sockets.

1.Lock the armrest by pressing the armrest release lever into the DOWN (vertical) position.

Xtra™ 44 Part No 1026793