Invacare 1026793 manual Adjusting the T-Arms, Removing T-Arms, Adjusting T-Arm Height

SECTION 7—ARMS

Removing T-Arms

1. Press in on the locking lever and lift the T-arm straight up and out of the T-arm socket.

NOTE: If the T-arm does not slide up and down in the T-arm socket as desired, adjust the T-arm socket. Refer to Adjusting the T-Arms on page 46.

2. Repeat STEP 2 for opposite side of the wheelchair.

T-Arm

Wheelchair

Frame

Locking Lever

(Towards the front

T-Armof the wheelchair) Socket

Slot

FIGURE 7.5 Installing/Removing T-Arms

Adjusting the T-Arms

Adjusting T-Arm Height

NOTE: For this procedure, refer to FIGURE 7.6.

1.Unlock the T-arm by flipping the T-arm release lever towards the inside of the wheelchair.

NOTE: If necessary, pull out on the T-arm release lever and rotate 180° so it can be flipped towards the outside of the wheelchair.

2.Slide the T-arm to one (1) of:

•Low Height T-Arms - Nine (9) positions.

•High Height T-Arms - Seven (7) positions.

NOTE: If the inside T-arm post does not slide up and down in the outside T-arm post as desired, perform one (1) of the following:

Xtra™ 46 Part No 1026793