Canon 2159B002 Messages regarding printing or adjusment, Use another paper, Cannot adjust band

Messages regarding printing or adjusment

Messages regarding printing or adjusment

Use another paper.

Cause	Corrective Action
The Printhead and feed amount cannot be adjusted	For automatic Printhead adjustment, we recommend
when highly transparent lm is loaded.	using a type of paper that you often use, other than
	lm.
	(→P.599)
	Adjust the feed amount manually.
	(→P.607)

Cannot print as specied.

Press Load/Eject and replace paper with A4/LTR (vertical) or larger

Cause	Corrective Action
The loaded paper is too small.	Press the Load/Eject button and switch to paper A4/Letter,
	vertical, or larger.

Press Load/Eject and replace roll with 10 in. wide or larger roll.

Cause	Corrective Action
The loaded paper is too small.	Press the Load/Eject button and load a roll at least 10
	inches (254 mm) wide.

Cannot adjust band.

Cause	Corrective Action
The Printhead nozzles are clogged.	Follow the steps below to check the nozzles.
	1.Print a test pattern to check the nozzles.
	(→P.625)
	2.Clean the Printhead if the nozzles are clogged.
	(→P.626)
Highly transparent lm is loaded that cannot be used	Adjust the feed amount manually.
for feed amount adjustment.	(→P.607)

Cannot adjust printhead.

Cause	Corrective Action
The Printhead nozzles are clogged.	Follow the steps below to check the nozzles.
	1.Print a test pattern to check the nozzles.
	(→P.625)
	2.Clean the Printhead if the nozzles are clogged.
	(→P.626)
Highly transparent lm is loaded that cannot be used	We recommend using a type of paper that you often
for Printhead adjustment.	use, other than lm, for Printhead adjustment.
	(→P.599)

Error Message 713