Canon 2159B002 user manual Borderless printng not possible, Check roll width and spacers

		Messages regarding paper
Borderless printng not possible.
Check roll width and spacers.
	Cause	Corrective Action
	The paper is loaded askew.	Insert the paper and Spacer for Borderless Printing
		rmly all the way into the printer.
		When using A1 or A2 rolls, attach the Spacer for
		Borderless Printing before loading the roll.
		(→P.150)
		When using sizes other than A1 or A2, remove the
		Spacer for Borderless Printing before loading the roll.
		(→P.150)
	The paper loaded is not compatible with borderless	Load paper compatible with borderless printing and
	printing.	try printing again. Paper you can use for borderless
		printing is restricted to particular types of paper and
		rolls of particular widths. For information on types of
		paper compatible with borderless printing, refer to the
		Paper Reference Guide. (→P.112)
	Because paper expands or contracts depending on	Use each type of paper only where the recommended
	the environment of use, it may become narrower or	environmental conditions are met. For details on
	wider than the supported width for borderless printing.	environmental conditions for various paper, see the
		Paper Reference Guide. (→P.112)
Check supported paper.
	Cause	Corrective Action
	The print job received species a type or width of	Follow these steps to change the settings of the print
	paper that is not compatible with borderless printing.	job to enable borderless printing.
		1.Hold down the Stop button for a second or more
		to cancel printing.
		2.Make sure the correct printer driver for the printer
		is selected and try printing again.
		For information on types of paper compatible with
		borderless printing, refer to the Paper Reference
		Guide. (→P.112)
		If you press the Online button and continue printing,
		the document will be printed with a border.

Error Message 705