Specifying the frame type using the printer Control Panel

1. Press the Menu button to display MAIN MENU.

2. Press ▲ or ▼ to select Interface Setup, and then press the ► button.

3. Press ▲ or ▼ to select NetWare, and then press the ► button.

4. Press ▲ or ▼ to select NetWare, and then press the ► button.

5. Press ▲ or ▼ to select On, and then press the OK button. Return to the NetWare menu.

6. Press ▲ or ▼ to select Frame Type, and then press the ► button.

7. Press ▲ or ▼ to select the frame type to use, and then press the OK button. Return to the NetWare menu.

8. Press ▲ or ▼ to select Print Service, and then press the ► button.

9. Press ▲ or ▼ to select the desired print service, and then press the OK button. Return to the NetWare menu.

If any of the settings is changed, a message for conrmation is displayed. In this case, press the OK button.

Important

•Be sure to complete step 10. This will activate the values you have entered.

Note

•If an error message is displayed, check the settings and correct any invalid values.

•To cancel the setup process, hold down the Stop button for a second or more.

Network Setting 575

Canon 2159B002 user manual Specifying the frame type using the printer Control Panel