Canon 2159B002 user manual DHCP, BOOTP, or Rarp

Network Setting (Windows)

Conguring the IP Address Using imagePROGRAF Device Setup Utility

From a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the printer to congure the printer’s IP address. This topic describes how to congure the IP address using imagePROGRAF Device Setup Utility.

Important

•To congure network settings, you must be logged in with administrative rights such as “Administrator” account. We recommend that your network administrator congure the network settings.

•For instructions on installing imagePROGRAF Device Setup Utility, see “Installing imagePROGRAF Device Setup Utility”. (→P.491)

1.Start imagePROGRAF Device Setup Utility from the start menu.

2.In the list of printers, select the printer to congure.

3.Choose Protocol Settings from the Printer menu.

4.In the Setting IP Address list, choose Manual.

5.Enter the IP address assigned to the printer and click the Set button.

6.Click OK after the Conrmation message dialog box is displayed.

7.Exit imagePROGRAF Device Setup Utility.

Note

•To congure the IP address automatically, choose Auto in the Setting IP Address list and select

DHCP, BOOTP, or RARP.

•You can also specify the subnet mask and default gateway.

586 Network Setting