Canon 2159B002 user manual Roll is empty, Roll feed unit err, No Roll Feed Unit

		Messages regarding paper
The roll is empty.
	Cause	Corrective Action
	There is no more paper left on the roll.	Follow the steps below to replace the used roll with a
		new roll of the same type and size.
		1.Remove the roll.
		(→P.128)
		(→P.123)
		2.Load the new roll.
		(→P.124)
		3.If no barcode was printed on the roll, specify the
		paper type.
		(→P.130)
		4.If no barcode was printed on the roll, specify the
		paper length.
		(→P.131)

Roll feed unit err

Cause	Corrective Action
The Roll Feed Unit is not working.	Turn off the printer, remove the Roll Feed Unit
	momentarily, and then reinstall it.
	(→P.153)
	(→P.154)
	If the message is still displayed after you do this,
	contact your Canon dealer for assistance.

No Roll Feed Unit.

Cause	Corrective Action
The printer has received a print job that species	Install the Roll Feed Unit and resend the print job.
rolls, but the Roll Feed Unit is not installed.	(→P.154)

Error Message 709