Handling rolls

6. Specify the type and length of the paper.

How the printer operates after the paper is fed varies depending on the setting for automatic detection of the remaining roll paper, as well as the barcode printed on rolls.

Automatic Detection of the

Barcodes

Printer Operation After the Paper is Fed

Remaining Roll Paper

 

 

On

Printed

The type and amount of paper left is automatically

 

 

detected based on the barcode printed on the roll.

 

 

There is no need to specify the type and length of

 

 

the paper.

 

 

 

 

Not printed

You must specify the type and length of the paper.

 

 

A menu for selection of the paper type and length

 

 

is automatically shown on the Display Screen.

 

 

(→P.130)

 

 

(→P.131)

 

 

 

Off

Printed

You must specify the type of paper.

 

 

(→P.130)

 

Not printed

 

 

 

 

 

7. Close the Roll Feed Unit Cover with one hand, as shown.

8. If the edge of the roll is bent or soiled, cut the edge of the paper.

1.Press the Online button to bring the printer ofine.

2.Press or to feed the roll paper to the position for cutting.

3.Select Yes in Paper Cutting on Printer Menu, and then press the OK button. (→P.135)

Handling Paper 127

Page 141
Image 141
Canon 2159B002 user manual