Printer Specications
Printer Specications

Specications

Important
•This information is subject to change as the printer is updated.
•The following values may vary depending on the operating environment.

Printer

Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation 100 W max.
Sleep mode 100-120 V : 5 W max.
(10 W max. when an IEEE 1394 (FireWire) expansion board
is installed.)
220-240 V : 6 W max.
(1 1 W max. when an IEEE 1394 (FireWire) expansion board
is installed.)
Power consumption
Of f 1 W max. ( *1 )
Operating noise Approx. 52 dB (A) max.
T emperature 15-30°C (59-86°F)Operating
environment
Humidity 10-80%, non-condensing
Printer only 997×810×344 mm (39.3×31.9×13.5 in)Dimensions (W × D
× H)
With stand 999×981×990 mm (39.3×38.6×39.0 in)
Printer only 55 kg (121.3 lb)W eight
(not including the
Printhead and Ink
T ank )
With stand 72 kg (158.7 lb)
Printer only 1,297×1,910×644 mm (51.1×75.2×25.4 in)Space required for
installation ( *2 )
With stand 1,297×2,081×1,285 mm (51.1×81.9×50.6 in)
Applicable standards International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned of f. T o stop all power consumption,
turn of f the printer and unplug the power cord.
*2: Normally , you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer , 300
mm (1 1.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (1 1.8 in) above the printer . Only
when printing from the Front Paper Feed Slot , leave 1,100 mm (43.3 in) of unobstructed space in front
of the printer and 700 mm (27.6 in) behind it.
74 Printer Parts