Canon 2159B002 user manual Conguring the Printer’s TCP/IP Network Settings

Network Setting

Conguring the Printer’s TCP/IP Network Settings

Follow the steps below to congure the TCP/IP network settings.

1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page.

http://“printer IP address or name”/

Example: http://xxx.xxx.xxx.xxx/

2. Select Administrator Mode and click Logon.

3. If a password has been set on the printer, enter the password.

4. Click Network in the Device Manager menu at left to display the Network page.

5. Click Edit in the upper-right corner of the TCP/IP group to display the Edit TCP/IP Protocol Settings page.

6. Refer to the TCP/IP Settings Items table to complete the settings.

TCP/IP Settings Items

Item	Details	Default Setting
Use DHCP	Activate this setting to use DHCP	Off
	for conguring the IP address.
Use BOOTP	Activate this setting to use	Off
	BOOTP for conguring the IP
	address.
Use RARP	Activate this setting to use RARP	Off
	for conguring the IP address.
RAW Mode Bi-direction	Activate this setting to use	Off
	Raw mode bidirectional
	communication.
Enable DNS Dynamic Update	Activate this setting to perform	Off
	DNS server registration
	automatically.
Use Zeroconf Function	Activate this setting to use	On
	Bonjour.
IP Address	Specify the printer’s IP address.	0.0.0.0
Subnet Mask	Specify the printer’s subnet mask.	0.0.0.0
Gateway Address	Specify the printer’s default	0.0.0.0
	gateway.
LPD Printing	Activate this setting to use LDP	On
	Printing.
IPP Printing	Activate this setting to use IPP	On
	Printing.
IPP Printer URI	SpecifytheURIoftheprinterused	printer
	for IPP printing using up to 252
	characters (1-252 characters).
	When using a standard Windows
	port for IPP printing, enter an
	URL less than 255 bytes for
	all characters for “http://<IP
	address/IPP-URI.”

564 Network Setting