Gigabyte AGP 4X(1.5V) manual Boot Up Floppy Seek, Password Check, CPU Hyper-Threading

English

USB-ZIP	SelectyourbootdeviceprioritybyUSB-ZIP.
USB-FDD	Select your boot device priority by USB-FDD.
USB-HDD	Select your boot device priority by USB-HDD.
ZIP	SelectyourbootdeviceprioritybyZIP.
Disabled	Disabledthisfunction.

)Boot Up Floppy Seek

0DuringPOST,BIOSwilldeterminethefloppydiskdriveinstalledis40or80tracks.360Ktypeis40 tracks720K,1.2Mand1.44Mareall80tracks.

Enabled BIOSsearchesforfloppydiskdrivetodetermineitis40or80tracks.Note thatBIOScannottellfrom720K,1.2Mor1.44Mdrivetypeastheyare all80tracks.

Disabled BIOSwillnotsearchforthetypeoffloppydiskdrivebytracknumber.Note thattherewillnotbeanywarningmessageifthedriveinstalledis360K. (Defaultvalue)

&Password Check

System	The system can not boot and can not access to Setup page will be denied
	if the correct password is not entered at the prompt.
Setup	Thesystemwillboot,butaccesstoSetupwillbedeniedifthecorrect
	passwordisnotenteredattheprompt.(Defaultvalue)

&CPU Hyper-Threading

Enabled	Enables CPU Hyper ThreadingFeature.Pleasenotethatthisfeatureisonly
	working for operating system with multi processors mode supported.
	(Defaultvalue)
Disabled	Disables CPU Hyper Threading.

)Init Display First

0This feature allows you to select the first initation of the monitor display from which card, when you install an AGP VGA card and a PCI VGA card on board.

PCI	SetInitDisplayFirsttoPCISlot.
AGP	SetInitDisplayFirstto AGP.(Defaultvalue)

GA-8PE667 Ultra2 / Pro Motherboard -42-