Gigabyte AGP 4X(1.5V) manual Halt on, Base Memory, Extended Memory

English

)Halt on

The category determines whether the computer will stop if an error is detected during power up.

NO Errors	Thesystembootwillnotstopforanyerrorthatmaybedetected
	and you will be prompted.
AllErrors	Whenever the BIOS detects a non-fatal error the system will be stopped.
All,ButKeyboar	Thesystembootwillnotstopforakeyboarderror;itwillstopfor
	allothererrors.(Defaultvalue)
All,ButDiskette	Thesystembootwillnotstopforadiskerror;itwillstopforall
	othererrors.
All,ButDisk/Key	Thesystembootwillnotstopforakeyboardordiskerror;itwill
	stopforallothererrors.

Memory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system.

The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.

Extended Memory

The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU’s memory address map.

GA-8PE667 Ultra2 / Pro Motherboard -40-