Gigabyte AGP 4X(1.5V) manual Install the Central Processing Unit CPU

English

Step 1: Install the Central Processing Unit (CPU)

Before installing the processor , adhere to the following warning:

If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation. Please make sure the CPU type is supported by the motherboard.

Step 1-1: CPU Installation

Angling the	Socket
rod to 650	Actuation
	Lever

1. Angling the rod to 65-degree maybe feel a	2. Pull the rod to the 90-degree directly.
kind of tight , and then continue pull the rod
to 90-degree when a noise “cough” made.

Pin1 indicator

3. CPU Top View

Pin1 indicator

4.Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Then insert the CPU into the socket.

GA-8PE667 Ultra2 / Pro Motherboard - 12 -