Gigabyte AGP 4X(1.5V) - page 50

- 46 -GA-8PE667 Ultra2 / Pro Motherboard
English
))
))
)Onboard LAN Boot ROM
0The function is to invoke onboard LAN chip to boot up the system
Enable Enable onboard LAN boot ROM function.
Disable Disable this function. (Default value)
))
))
)Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
))
))
)Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default Value)
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
))
))
)UART Mode Select
0This feature allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Using as IR and set to ASKIR Mode.
IrDA Using as IR and set to IrDA Mode.
Normal Using as standard serial port. (Default Value)
SC R Using as smart card Interface.
))
))
)UR2 Duplex Mode(When UART Mode Select is set [ASKIR or IrDA or SCR])
0This feature allows you to select the IR modes.
Half IR Function Duplex Half. (Default Value)
Full IR Function Duplex Full.