Gigabyte AGP 4X(1.5V) IDE1/ IDE2IDE1/IDE2 Connector, IDE3 /IDE4 RAID/ATA133,Green Connectorr

7) IDE1/ IDE2(IDE1/IDE2 Connector)

Please connect first harddisk to IDE1 and connect CDROM to IDE2. The red stripe of the ribbon cable must be the same side with the Pin1.

40 39

2	1
IDE2	IDE1

8) IDE3 /IDE4 (RAID/ATA133,Green Connectorr)**

The rad stripe of the ribbn cable must be the same side with the Pin1.

If you wish to use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133).

Then, install the correct driver to have proper operation. For details, please refer to the RAID manual.

(BIOS Default Value :ATA, If you want to use RAID function, please change “Integrated Peripherals-RAID Controller Function “ to “RAID”)

240 IDE4

IDE3

139

* For GA-8PE667 Pro Only ** For GA-8PE667 Ultra2 Only

English

- 23 - Hardware Installation Process