Gigabyte AGP 4X(1.5V) IDE Primary Master, Slave / Secondary Master, Slave, Drive a / Drive B

)IDE Primary Master, Slave / Secondary Master, Slave

ThecategoryidentifiesthetypesofharddiskfromdriveCtoFthathasbeeninstalledinthe computer.There are two types: auto type, and manual type. Manual type is user-definable; Auto typewhichwillautomaticallydetectHDDtype.

Notethatthespecificationsofyourdrivemustmatchwiththedrivetable. Theharddiskwillnotwork properlyifyouenterimproperinformationforthiscategory.

IfyouselectUser Type,relatedinformationwillbeaskedtoentertothefollowingitems.Enterthe information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer.

Capacity:	Theharddisksize. The unit is Mega Bytes.
Access Mode:	Theoptionsare: Auto / Large / LBA /Normal.
Cylinder:	The cylinder number of hard disk.
Head	The read / Writeheadnumberofharddisk.
Precomp	Thecylinernumberatwhichthediskdriverchangesthewritecurrent.
Landing Zone	The cylinder number that the disk driver heads(read/write) are seated when the
	diskdriveisparked.
SECTORS	The sector number of each track define on the hard disk.

If a hard disk has not been installed select NONE and press <Enter>.

)Drive A / Drive B

The category identifies the types of floppy disk drive A or drive B that has been installed in the computer.

None	Nofloppydriveinstalled
360K,5.25“.	5.25 inch PC-type standard drive; 360K byte capacity.
1.2M,5.25”.	5.25inch AT-typehigh-densitydrive;1.2Mbytecapacity
	(3.5 inch when 3 Mode is Enabled).
720K,3.5“.	3.5 inch double-sided drive; 720K byte capacity
1.44M,3.5“.	3.5inchdouble-sideddrive;1.44Mbytecapacity.
2.88M,3.5“.	3.5inchdouble-sideddrive;2.88Mbytecapacity.

)Floppy 3 Mode Support (for Japan Area)

Disabled	Normal Floppy Drive. (Default value)
Drive A	Enabled 3 mode function of Drive A.
DriveB	Enabled 3 mode function of Drive B.
Both	Drive A & B are 3 mode Floppy Drives.

English

-39- BIOS Setup