Nady Systems UB-10 owner manual Introduction, Specifications, URR-10RECEIVER, URR-10TRANSMITTERS

Models: UB-10

1 7
Download 7 pages 24.49 Kb
Page 3
Image 3
INTRODUCTION

INTRODUCTION

SPECIFICATIONS

Thank you for purchasing a Nady URR-10 Diversity Wireless Microphone System and congratulations on your choice. The URR-10 is the best performance and price value available in rackmount UHF wireless systems and is loaded with features:

Clear channel operation on the wide open, uncluttered UHF band for interference-free performance in any application or locale

Nady’s proprietary companding circuitry for an industry best 120dB Dynamic Range, and the clearest, most natural sound available

Tone Squelch™ for locking out potential interference

Choice of transmitters:

UB-10 Bodypack with unique 3-way switch for selecting input type: instrument (guitar, bass, etc.), headmic™ headworn mic, or lavalier/lapel mic

UH-10 Handheld microphone with a powerful neodymium cartridge that delivers unsurpassed audio, minimal handling noise and enhanced feedback rejection

URR-10 receiver with DigiTRU Diversity™ for maximum range and dropout protection, full LED indicators, both 1/4" unbalanced and XLR balanced outputs, and special circuitry for noiseless transmitter ON/OFF switching

Frequency Response

50 Hz - 15 KHz, +/- 3 dB Dynamic Range

120 dB

Total Harmonic Distortion < 0.6%

RF Carrier Frequency Range

UHF, choice of single frequencies from 794-820 MHz

Frequency Stability

+/- 0.005% crystal controlled Modulation

FM (F3E), +/- 20 KHz Operating Range

Up to 250 feet typical (depending on site conditions)–up to 500+ feet line- of- sight

URR-10 RECEIVER

Reception Mode

DigiTRU Diversity™ (Dual Antenna)

Squelch

Tone Key (32.768 KHz), External

Control

Controls

Power ON/OFF, Volume Control, Level Low/Hi Switch, Squelch (Mute) Adjust Connectors

DC in, 1/4" (6.3 mm) unbalanced phone jack (750 mV/5K Ohm), XLR balanced output (60 mV/600 Ohm), A

&B BNC antenna jacks, fuse LED Indicators

Power ON, Diversity A/B, RF LEVEL and AF LEVEL (5 segment) displays Unwanted Signal Rejection

60dB image and spurious Power Requirements

DC 12-15V @ 300 mA, AC/DC adapter included Dimensions

16.1"x 1.73"x 6.5"

(409 x 44 x 165 mm) Fuse

20mm glass type, 250V, 500mA Weight

3.93 lb (1.8 Kg)

URR-10 TRANSMITTERS

Audio Inputs

UB-10 Bodypack: 3.5mm locking mini-jack 3-way select switch for inputs: instrument, headworn mic, or lavalier mic UH-10 Handheld: Integral Nady DM-10D neodymium dynamic cartridge

Controls

UB-10: OFF/STANDBY/ON,

INSTRUMENT/HEADWORN

MIC/LAV MIC, INPUT LEVEL

UH-10: OFF/STANDBY/ON

LED Indicator

Unit “ON” (single flash), Low Battery Alert (steady)

RF Power Out

50mW nominal (maximum allowed by FCC)

Harmonic & Spurious Emissions

<-50 dB Battery

9V Alkaline Battery Life

8-10 Hours (35mA draw typical) Dimensions

UB-10: 4.2" x 2.5"x .88" (10.7 x 6.4 x 2.2 cm) UH-10: 9.5"x 1.37" (24.1 x 3.48cm)

Weight

UB-10: 3 oz (84g)

UH-10: 7.5 oz (210g)

Specifications subject to change for product improvement purposes

 

 

 

 

4

 

13

Page 3
Image 3
Nady Systems UB-10 owner manual Introduction, Specifications, URR-10RECEIVER, URR-10TRANSMITTERS