SECTION
•Tighten - Tightening the set screws on the outside
•Loosen - Loosening the set screws on the outside
3.Lock the
Set Screws | Inside |
| |
| Post |
| |
Outside | Unlocked Position |
FIGURE 7.6 Adjusting T-Arm Height
Adjusting T-Arm Width
NOTE: For this procedure, refer to FIGURE 7.7.
1.Remove the two (2) phillips screws that secure the arm pad to the arm tube.
2.Turn the arm pad around and reposition the arm pad on the arm tube.
3.
4.Repeat for the opposite side, if necessary.
Arm Pad
Arm Tube
Phillips Screw
Phillips
FIGURE 7.7 Adjusting T-Arm Width
Part No 1026793 | 47 | Xtra™ |