Clarion Mastering MD Changer Operations and d.scan.go Functions for Your Stereo System

MD Changer Operations

MD changer functions

When an optional MD changer is connected through the CeNET cable, this unit controls all the MD changer functions. This unit can control a total of 2 changers (MD and/or CD).

Press FUNC button 7and select the MD changer mode to start play. If 2 MD changers are con- nected, press FUNC button 7 to select the MD changer for play.

∗If “NO DISC” appears in the display, load MDs into the MD changer.

Pausing play

1.Press Play/pause button @ to pause play. “PAUSE” appears in the display.

2.To resume play, press Play/pause button @ again.

Switching disc titles and track titles

This unit can display disc titles and track titles already entered on MDs.

∗Titles cannot be entered for MDs with this unit. 1. Press DISP button 3 to display the title. The

disc title or track title is displayed.

2.Each time you press and hold DISP button 3 for 1 second or longer, the display toggles between the disc title and the track title.

Note:

•If an MD is not input its disc title or a track title, “DTITLE” or “TTITLE” appears in the display.

Selecting an MD

Each of the Direct button 1 corresponds to an MD loaded into the MD changer. Press the corresponding Direct button 1 (1 to 6) to select the desired disc.

∗If an MD is not loaded in a slot of the MD changer, pressing the Direct button 1 corresponding to its disc number is invalid.

Selecting a track

●Track-up

1.Press Right button ´ to move ahead to the beginning of the next track.

2.Each time you press Right button ´, the track advances ahead to the beginning of the next track.

20 ADX5655z

●Track-down

1.Press Left button % to move back to the be- ginning of the current track.

2.Press Left button % twice to move to the be- ginning of the previous track.

Fast-forward/fast-backward

●Fast-forward

Press and hold Right button ´ for 1 second or longer.

●Fast-backward

Press and hold Left button % for 1 second or longer.

Top function

The top function plays from the first track (track No. 1) of the disc. Press the Direct button 1 (1 to 6) with the same number as the MD playing.

∗If an MD is not loaded in a slot of the MD changer, pressing the Direct button 1 corresponding to its disc number is invalid.

Scan play

The scan play locates and plays the first 10 sec- onds of each track on a disc automatically. This function continues on the disc until it is canceled.

∗The scan play is useful when you want to select a desired track.

1.Press SCN button 5 to start track scanning. “T-SCAN” lights in the display.

2.To cancel the scan play, press SCN button 5 again. “T-SCAN” goes off from the display and the current track continues to play.

Disc scan play

The disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected MD changer. This function continues automatically until it is canceled.

∗The disc scan play is useful when you want to se- lect a desired MD.

1.Press and hold SCN button 5 for 1 second or longer. DISC indication 3 and “D-SCAN” light in the display and the disc scan play starts.

2.To cancel the disc scan play, press and hold SCN button 5 again. DISC indication 3 and “D-SCAN” go off from the display and the cur- rent track continues to play.

280-7452-00