Clarion PE-2322B Basic Operations, Setting the Z-enhancer, Adjusting the tone, Adjusting the bass

Basic Operations

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display sev- eral seconds after the adjustment.

∗When you have entered a title in a CD, it ap- pears in the sub display. If you have not en- tered a title, “NO-TTL” appears in the title dis- play instead. For information on how to enter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”.

∗You can adjust the way of scrolling a title. For the details on it, refer to the subsection “Adjusting the way of scrolling” in the “Other Handy Functions”.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “OFF”.

Each time you press Z-EHCR button 2, the tone effect changes in the following order:

“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜

“OFF” ➜ “Z-EHCR 1”...

•Z-EHCR 1 : bass emphasized

•Z-EHCR 2 : treble emphasized

•Z-EHCR 3 : bass and treble emphasized

• OFF : no sound effect

Adjusting the tone

Press A-M button ( and select the item to ad- just. Each time you press A-M button (, the item changes in the following order:

●When the Z-enhancer is off

“BASS” ➜ “TREB” ➜ “BAL” ➜ “FAD” ➜

Function mode...

●When Z-enhancer 1, 2 or 3 is set

“Z-EHCR” ➜ “BAL” ➜ “FAD” ➜ Function

mode...

Adjusting the bass

1.Press A-M button ( and select “BASS”.

2.Press Up button & to emphasize the bass, or press Down button *to attenuate the bass.

∗The factory default setting is “0”. (Adjustment range: −6 to +6)

3.When the adjustment is complete, press A-M button (several times until the function mode is reached.

Adjusting the treble

1.Press A-M button ( and select “TREB”.

2.Press Up button & to emphasize the treble, or press Down button * to attenuate the treble.

∗The factory default setting is “0”. (Adjustment range: −6 to +6)

3.When the adjustment is complete, press A-M button (several times until the function mode is reached.

Adjusting the balance

1.Press A-M button ( and select “BAL”.

2.Press Up button & to emphasize the sound from the right speaker, or press Down button * to emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press A-M button (several times until the function mode is reached.

Adjusting the fader

1.Press A-M button ( and select “FAD”.

2.Press Up button & to emphasize the sound from the front speakers, or press Down but- ton * to emphasize the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press A-M button (several times until the function mode is reached.

Adjusting the Z-enhancer

1.Press Z-EHCR button 2 and select the Z- enhancer mode (1 to 3) to adjust.

2.Press A-M button ( and select “Z-EHCR”.

3.Press Up button & or press Down button * to adjusts Z-enhancer.

∗When Z-enhancer 1 is selected, you can adjust the bass in the range of ±2.

∗When Z-enhancer 2 is selected, you can adjust the treble in the range of ±2.

∗When Z-enhancer 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When the adjustment is complete, press A-M button (several times until the function mode is reached.

10 ADX5655z

280-7452-00