Invacare 1026793 manual Heel Loop Replacement, Installing Impact Guards/Calf Strap

SECTION 4—FRONT RIGGINGS

Heel Loop Replacement

NOTE: For this procedure, refer to FIGURE 4.8.

1.Remove the hex screw and coved washer that secures the lower half of the footrest to the swingaway footrest assembly.

2.Remove the lower footrest assembly.

3.Remove the phillips screw and locknut that secure the heel loop to the footrest.

4.Slide heel loop over slide tube of footrest assembly.

5.Replace heel loop.

6.Reverse STEPS 1-5 to reassemble.

NOTE: When securing the heel loop to the footrest assembly, tighten the phillips screw and locknut until the spacer is secure.

Composite/Aluminum/Tubular Footplates

Hex Screw/Coved Washer Phillips Screw

Spacer

Locknut

FIGURE 4.8 Heel Loop Replacement

Installing Impact Guards/Calf Strap

NOTE: For this procedure, refer to FIGURE 4.9.

1.Remove impact guard/calf strap from packaged container if not already secured to the footrest.

2.Secure the impact guards to the footrest frame.

3.Secure the optional calf strap around the footrest frame (with the impact guards attached).

Swingaway Front Frame

Calf Strap

Impact

Guard

FIGURE 4.9 Installing Impact Guards/Calf

Strap

Part No 1026793 33 Xtra™