KitchenAid 2000495 Now start, Place appliance doily under -El the side of the refrigerator

Models: 2000495

1 12
Download 12 pages 25.87 Kb
Page 9
Image 9
Now start...

Now start...

Remove top grille assembly package, literature package and parts bag taped to the

refrigerator door and save.

Product Damage Do Not lower refrigerator against shipping base when removing the shipping base. Lowering the refrigerator against the shipping base could damage the components on the bottom of the refrigerator.

Floor Damage

Keep cardboard shipping piece or plywood under refrigerator

until it is installed in operating

position.

Failure to do so may cause damage to floor covering.

Remove the four brackets (2 on each side) that attach

to the bottom of the refrigerator. Discard brackets and shipping base. Do Not remove tape and door bracing at this time.

Place appliance doily under -Elthe side of the refrigerator.

I Wrap strap from truck loosely around refrigerator. insert two corner posts around handles to prevent scratching. Insert two corner posts over the cabinet side trim to prevent damage.Tighten strap making sure that handles and cabinet side trim will be protected.

Personal injury Hazard

lBecause of the weight and size of the built-in refrigerator, two or more people are needed to move and safely install it.

9 Most of the refrigerator’s weight is at the top. Extra care is needed when moving the refrigerator to prevent tipping.

Failure to do so could result in personal injury.

Move refrigerator to

14kitchen. Place cardboard n or plywood under

refrigerator. Remove appliance dolly. Open doors and remove all boxes, parts packages and packing materials from inside refrigerator and freezer compartments. Set aside until needed during installation.

Do Not remove any protective

film until refrigerator is completely installed.

6.

16.

Page 9

Page 9
Image 9
KitchenAid 2000495 installation instructions Now start, Place appliance doily under -El the side of the refrigerator