Sun Microsystems Sun Fire V100 manual Insert and align the new hard disk drive see FIGURE

■If the server is already in use, see “To Change Components In a Sun Fire V100 Server That Is In Use” on page 88.

1.Place the unit on an ESD surface and attach an antistatic wrist strap (see

FIGURE 8-2).

2.Remove the server’s top cover (see “To Remove the Top Cover” on page 89).

3.Remove the metal placeholder if your server has one (if it was configured with a single hard disk drive, the second hard disk drive slot will have the placeholder installed).

FIGURE 8-7Removing the HDD Placeholder

4.Insert and align the new hard disk drive (see FIGURE 8-8).

a.Position HDD and slide onto the clips on the base of the server.

b.Press the handle into the two clips on the base of the server.

Chapter 8 Removing and Replacing Components 93