NETGEAR XS712T-100NES manual Certificate Management, 185

XS712T Smart Switch

After the session is inactive for the configured amount of time, the administrator is automatically logged out and must re-enter the password to access the management interface. A value of zero corresponds to an infinite timeout. The valid range is 1—60 minutes. The default value is 5 minutes.

7.In the HTTPS Session Hard Timeout (Hours) field, specify the number of hours an HTTPS session can remain active, regardless of session activity.

The value must be in the range of (1–168) hours. The default value is 24 hours.

8.In the Maximum Number of HTTPS Sessions field, specify the maximum number of HTTPS sessions that can be open at the same time.

The value must be in the range of (0–4). The default value is 4.

9.Click Apply.

Certificate Management

Use this screen to generate or delete certificates.

To manage certificates:

1. Select Security > Access > HTTPS > Certificate Management.

From the Certificate Present field, a Yes or No status displays.

2.Under Certificate Present, select one of the following:

•Select None to not display the certificates. This is the default selection.

•Select Generate Certificates to generate the Certificate files.

•Select Delete Certificates to delete the corresponding Certificate files, if it is present.

The Certificate Generation Status field displays whether SSL certificate generation is in progress.

Certificate Present displays whether there is a certificate present on the device.

3.Click Apply to start the certification configuration.

185