NETGEAR XS712T-100NES manual Use SNMPv3, User-Defined Fields

XS712T Smart Switch

User-Defined Fields

User-defined fields can contain 1 to 159 characters, unless otherwise noted in the field label on the configuration screen. All alphanumeric and special characters can be used except for the following (unless specifically noted for that feature):

Table 2. Disallowed characters in user-defined fields

Character	Definition
\	Backslash
/	Forwards slash
*	Asterisk
?	Question mark
<	Less than
>	Greater than
	Pipe

Use SNMPv3

The XS712T Smart Switch software supports the configuration of SNMP groups and users that can manage traps that the SNMP agent generates.

The XS712T Smart Switch use both standard public MIBs for standard functionality and private MIBs that support additional switch functionality. All private MIBs begin with a hyphen (-) prefix. The main object for interface configuration is in -SWITCHING-MIB, which is a private MIB. Some interface configurations also involve objects in the public MIB, IF-MIB.

SNMP is enabled by default. The System Information screen, which is the screen that displays after a successful login, displays the information you need to configure an SNMP manager to access the switch. To configure information for SNMPv1 or SNMPv2, see SNMPV1/V2 on page 53.

Any user can connect to the switch using the SNMPv3 protocol, but for authentication and encryption, the switch supports only one user which is admin; therefore there is only one profile that can be created or modified.

21