NETGEAR XS712T-100NES manual Multicast Router Configuration, 119

Models: XS712T-100NES

1 310
Download 310 pages 34.14 Kb
Page 119
Image 119

XS712T Smart Switch

port but were still interested in receiving multicast traffic directed to that group. Also, fast-leave processing is supported only with IGMP version 2 hosts.

Host Timeout. Sets the value for group membership interval of IGMP snooping for the specified VLAN ID. The valid range is (Maximum Response Time + 1) to 3600 seconds.

Maximum Response Time. Sets the value for maximum response time of IGMP Snooping for the specified VLAN ID. Valid range is 1 to 25. The configured value must be less than the Group Membership Interval. The default is 10 seconds.

MRouter Timeout. Enter the amount of time that a switch will wait to receive a query on the VLAN before removing it from the list of VLANs with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds, which means there is no expiration.

Query Mode. Enable or disable the IGMP Querier Mode for the specified VLAN ID.

Query Interval. Enter the value for IGMP Query Interval for the specified VLAN ID. The valid range is 1–1800 seconds. The default is 60 seconds.

3.Click Add.

To disable IGMP snooping on one or more VLANs:

1.Select the check box next to each VLAN ID on which IGMP snooping is to be disabled.

2.Click Delete.

Multicast Router Configuration

If a multicast router is attached to the switch, its existence can be learned dynamically. You can also statically configure an interface as a multicast router interface, which is an interface that faces a multicast router or IGMP querier and receives multicast traffic. Use this screen to manually configure an interface as a static multicast router interface. All IGMP packets snooped by the switch will be forwarded to the multicast router reachable from this interface. The configuration is not needed most of the time since the switch will automatically detect the presence of multicast router and forward IGMP packet accordingly. It is needed only when you want to make sure the multicast router always receives IGMP packets from the switch in a complex network.

To configure the multicast router mode for one or more interfaces:

1. Select Switching > Multicast > IGMP Snooping > Multicast Router Configuration.

119

Page 119
Image 119
NETGEAR XS712T-100NES manual Multicast Router Configuration,  To disable Igmp snooping on one or more VLANs, 119