XS712T Smart Switch
Global Trust Mode can be one of the following:
•Untrusted. Do not trust any CoS packet marking at ingress.
•802.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The QoS setting lets you map each of the eight priority levels to one of seven internal hardware priority queues.
•DSCP. The six most significant bits of the DiffServ field are called the Differentiated Services Code Point (DSCP) bits.
4.From the Interface Trust Mode drop down list, select the trust mode for ingress traffic on the interface.
Interface Trust Mode can be one of the following:
•Untrusted. Do not trust any CoS packet marking at ingress.
•802.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The QoS setting lets you map each of the eight priority levels to one of seven internal hardware priority queues.
•DSCP. The six most significant bits of the DiffServ field are called the Differentiated Services Code Point (DSCP) bits.
5.Click Apply.
CoS Interface Configuration
Use the CoS Interface Configuration screen to apply an interface shaping rate to all interfaces or to a specific interface.
To configure CoS settings for an interface:
1. Select QoS > CoS > Advanced > CoS Interface Configuration.
