XS712T Smart Switch
2.From the Querier Admin Mode field, enable or disable the administrative mode for MLD Snooping Querier.
3.In the Querier Address field, specify the Snooping Querier Address to be used as source address in periodic MLD queries.
This address is used when no address is configured on the VLAN on which query is being sent. The supported IPv6 formats are x:x:x:x:x:x:x:x and x::x.
4.In the MLD Version field, the MLD protocol version used in periodic MLD queries is displayed.
The supported MLD Version is 1.
5.In the Query Interval field, specify the time interval in seconds between periodic queries sent by the snooping querier.
The Query Interval must be a value in the range of
6.In the Querier Expiry Interval field, specify the time interval in seconds after which the last querier information is removed.
The Querier Expiry Interval must be a value in the range of
7.Click Apply.
Querier VLAN Configuration
Use this screen to configure MLD queriers for use with VLANs on the network.
To configure MLD queriers:
1. Select Switching > Multicast > MLD Snooping Querier > Querier VLAN Configuration.
