Paradyne JetFusion Integrated Access Device manual Quick Con- figuration, WAN Configuration Menu

Quick Con- figuration

The JF2304 and JF2308 contain a number of predefined configurations for physical connections and PVCs.

JF2304 The Quick Configuration option is displayed only on the

JF2308 JF2304 and JF2308.

To use one of the predefined configurations:

1.On the Main menu, type 5 to select Configure WAN.

2.The IAD displays the WAN Configuration menu.

Figure 4–66. WAN Configuration Menu

*****************************************

* WAN Configuration menu *

*****************************************

Configuring SDSL

0.Quick Configuration

1.Configure Datalink Protocol

2.Configure Physical Interface

Type 0 to select Quick Configuration.

3. The IAD displays the Quick Configuration menu.

Figure 4–67. Quick Configuration Menu

*****************************************

Quick Configuration

*****************************************

** System will reset after changing configuration **

Current configuration:

Differs from listed configurations

1.Lucent Stinger (Conexant Autobaud, Payload Scrambling)

2.Nokia (Auto Cycle)

3.Coppermountain (Auto Sense)

4.Paradyne (Unframed 784kbps, Payload Scrambling)

5.AccessLan CPE

6.ATM (Unframed, 1152kbps fixed)

7.Frame Relay (784kbps fixed)

4.Type the option corresponding to the DSLAM to which the IAD is connected.

5.The IAD automatically resets.

6.To continue configuration, log back on to the IAD.

2000-A2-GB20-10 - 95 - February 2004