Paradyne JetFusion Integrated Access Device manual Iad

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

￿Reorient or relocate the receiving antenna.

￿Increase the separation between the equipment and receiver.

￿Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

￿Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Paradyne could void the user’s authority to operate this equipment.

The JetFusion models below comply with Part 68 of the FCC Rules. On the bottom of the base of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company.

NOTE: REN is not required for some types of analog or digital facilities.

Before connecting your IAD, you must inform the telephone company of the following information.

IAD

JF2208, JF2216, JF2224

JF2004, JF2008

SOC/REN

SOC = 6.0N

REN = 0.0B

USOC

RJ48C

RJ11C

FIC

04DU9.BN,

04DU9.DN,

04DU9.1KN,

04DU9.1SN

-

An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that is Part 68 compliant. See installation instructions for details. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all those devices ring when your telephone number is called. In most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area.

NOTE: REN is associated with loop-start and ground-start ports. Do not use for E&M or digital ports.

If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue your service temporarily. If possible, they will notify you in advance. However, if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.

2000-A2-GB20-10 - xiv - February 2004