Paradyne JetFusion Integrated Access Device manual Changing a Password

Table 3–2lists the default values for the user IDs and passwords:

Table 3–2. Default User IDs and Passwords

Security Level

User

Network Administrator

Supervisor

User ID

<Enter>

NetMan

Supervisor

Password

<Enter>

<Enter>

supervisor

The user ID and password may contain up to 17 alphanumeric characters. These values are case sensitive; spaces and punctuation characters are not allowed.

NOTE The IAD can only store one user ID and password at each security level.

Changing a Password

To change a password at any security level, you must sign on at or above the security level you’re changing and follow these steps:

1.On the Main menu, type 8 (Configure Login) to display the Password Configuration menu.

Figure 3–1. Password Configuration Menu

*******************************************

Password Configuration Menu

*******************************************

1.Change User ID

2.Change User Password

3.Change NetMan Password

4.Change Supervisor Password

5.Change Primary RADIUS Server Address

6.Change Primary RADIUS Encryption Secret

7.Change Secondary RADIUS Server Address

8.Change Secondary RADIUS Encryption Secret

9.Display RADIUS Configuration

2.Type 2, 3, or 4 to change the password for the selected level.

3.Enter the password for the current level.

4.Enter the new password after the prompt, or press Enter to enter a null password.

5.Enter the new password (or Enter) again, to confirm the change.

The IAD immediately updates the password. The next time you log in at that level, the new password will be in effect.

NOTE You cannot use the Escape key to exit the password update command. To exit, deliberately enter an incorrect password at the confirmation step, or reset the IAD.

2000-A2-GB20-10 - 24 - February 2004