Paradyne JetFusion Integrated Access Device manual Diagnostics

Using the

Diagnostics

Menu

Diagnostic tasks are all displayed and accessed on the Diagnostics menu (displayed by typing Z on the Main menu). Tasks in this chapter are described beginning at the Diagnostics menu.

Figure 14–1. Diagnostics Menu

*******************************************

Diagnostics Menu

*******************************************

P. POTS Diagnostics

S. SDSL Diagnostics

B. ISDN-BRI Diagnostics

NOTE Option S (SDSL Diagnostics) is available only on SDSL- equipped IADs: JF2304 and JF2308. Option B (ISDN-BRI Diagnostics), is available only on the JF2004i and the JF2104i.

POTS Diagnostics

You may sign on as Supervisor or Network Manager to perform diagnostics tasks. Options that display in the Diagnostics menu are the same for both security levels. Type the option and proceed to the corresponding section.

A WAN uplink is not required to perform POTS testing. To perform POTS diagnostics type P on the Diagnostics Menu.

The IAD loads and configures the DSP software module, and displays the following menu:

Figure 14–2. POTS Diagnostics Menu

*******************************************

POTS Diagnostics

*******************************************

D. Dialup Test

H. Hotline Test

R. Ring Test

S. Power Supply Test

P. Phone Detect Test

R. Ring Test

O. On/Off Hook Test

I. Infineon Codec Test

2000-A2-GB20-10 - 237 - February 2004